UE 55-0500/3 is a UV cell coating for the European OEM platform (project period 2018 - 2030). It is applied by hot spray at 40℃, target film thickness 110 µm (70-145 µm). Key performance includes 3000 VDC BOL/EOL dielectric strength, insulation resistance >100GΩ BOL/EOL, very high anti sagging ability, GT0 adhesion, lap-shear BOL/EOL >8MPa. It offers coolant resistance. Validated by EOL1 240h 40℃/100%RH, EOL2 climate cycle test 30 days. It is REACH/RoHS confirm, no toxic or CMR category 1 ingredients. Online recycling utilization rate up to 95%, easy laser decoating.

This product is suitable for cooling plates, featuring a viscosity of 700~900 mPas and excellent anti-sagging ability. It meets the 5000VDC resistance requirement for BOL/EOL, while possessing coolant resistance, water resistance, and corrosion resistance. It achieves GT0 adhesion and has a shear strength of ＞10MPa for BOL/EOL, with a thermal conductivity of ≥0.4W/(m·k). The product can pass the EOL 1000-hour durability test under D85 (85℃/85%RH) conditions and EOL 2000-hour SST (Salt Spray Test), and its online recyclability rate reaches up to 95%.

UE 55-5550/0 is a UV cell coating for the European OEM cylindrical cells (project period 2024 - 2038). It is applied by DOD at 40℃, target film thickness 130 µm. Key performance includes insulation resistance >100GΩ BOL/EOL, very high anti sagging ability, GT0 adhesion, lap-shear BOL/EOL >8MPa. It offers coolant resistance. Validated by EOL1 240h 40℃/100%RH. It is REACH/RoHS confirm, no toxic or CMR category 1 ingredients. Suitable for Nickel/Steel substrates.

This product features laser-free pre-treatment, achieving up to 30% cost savings in production line investment. It has a viscosity of 500-800 mPas and very high anti-sagging ability, while maintaining 4500VDC resistance and insulation resistance exceeding 100 GΩ throughout BOL and EOL stages. With coolant resistance, it achieves GT0 adhesion grade and retains a shear strength of ＞8MPa for both BOL and EOL unlasered. The product passes the EOL 1000-hour durability test under D85 (85℃/85%RH) conditions, complies with REACH and RoHS regulations.

"Think Pink". Color request from German OEM. High-End product equipped with performances such as 5000VDC, thermal conductivity of 0.7W/(m·k), >10MPa lap-shear BOL & EOL and an electrical resistance of >1TOhm.

Our first generation of UV Ink, LED 395nm curable, developed to match Xaar printheads (GS 40 etc.). The material is yellowish tinted on customer request and fulfills 2000h 85/85 and an electrolyte resistance of 7 days @ 55℃. Can be applied in two layers wet-in-wet or wet-on-dry (LED). The material fulfills GB 38031/2025.

Our first generation of UV Ink, LED 395nm curable, developed to match Xaar printheads (GS 40 etc.). The material is bluish tinted and fulfills 2000h 85/85 and an electrolyte resistance of 7 days @ 55℃. Can be applied in two layers wet-in-wet or wet-on-dry (LED). The material fulfills GB 38031/2025.

Our first generation of UV Ink, LED 395nm curable, developed to match Xaar printheads (GS 40 etc.). The material is reddish tinted and fulfills 2000h 85/85 and an electrolyte resistance of 7 days @ 55℃. Can be applied in two layers wet-in-wet or wet-on-dry (LED). The material fulfills GB 38031/2025.